Hyundai Accent: Inspection

Camshaft Position Sensor (CMPS). Repair procedures

...

Removal

• DON’T remove the camshaft position sensor while the engine is running or right after engi ...

See also:

Adjustment
Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw. After adjustment, apply a small amo ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and then remove the se ...