Hyundai Accent: Inspection
| 1. |
Check the bushing for wear and deterioration.
|
| 2. |
Check the lower arm for deformation.
|
| 3. |
Check the all bolts and nuts.
|
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
See also:
Crankshaft Position Sensor
(CKPS). Troubleshooting
Waveform
This example shows a typical Crankshaft Position Sensor(CkPS)
and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection
and ignition timing by using ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Side Impact Sensor (SIS). Components and Components
Location
Components
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com