Hyundai Accent: Installation
| 1. |
Install the heater & air conditioning controller.
|
| 2. |
Install the audio unit.
|
| 3. |
Connect the battery (-) terminal.
|
Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the audio unit.
(Refer to the BE group - "Audio")
3.
...
Fuses And Relays
...
See also:
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of
...
Using the Tire Mobility Kit
1. Detach the speed restriction label (0) from the sealant bottle (1), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too ...
BCM connectors
Pin
Connector A
Connector B
1
Battery
Room Lamp Output
2
Local ignition1 input in BCM
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com