1. |
Install the interior junction box.
|
2. |
Install the crash pad lower panel.
|
3. |
Check that all system operates normally.
|
Adjustment
ETC module learning
procedure
When installing new ETC module or re-installing it, ETC module
learning procedure must be performed.
1.
Hold the ignition k ...
Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or
to install tire chains on your tires. If snow tires are needed, it is necessary
to select tires equivalent in size and ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...