Hyundai Accent: Instrument Cluster. Components and Components Location

Components and Components Location

Component Location 1. Instrument cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fl ...

Instrument Cluster. Schematic Diagrams

...

See also:

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...

Measurement Point
Measurements should be taken at the center of the hole. ...

Removal
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...