Description
Function |
- |
This function dose not operate if the vehicle equipped BCM.
|
- |
With the tail lamp switched ON, if the ignition Is switched OFF
and the driver’s door opened, the tail lamp warning buzzer should be
automatically turned ON.
|
- |
The tail lamp warning buzzer built in the instrument cluster.
|
Components of the Tire Mobility Kit
0. Speed restriction label
1. Sealant bottle and label with speed restriction
2. Filling hose from sealant bottle to wheel
3. Connectors and cable for the power outlet direct connection
4. Holde ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...