Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Daytime Running Lights / Repair procedures / Removal

1.	Disconnect the negative(-) battery terminal.

2.	Remove the glove box. (Refer to the BD group - "Crash pad")

3.	Remove the DRL unit (A) after disconnecting the connector and loosening the mounting nut.

Repair procedures

...

Installation

1. Install the DRL unit. 2. Install the glove box. ...

See also:

Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) is blown Check for short and ...

Installation
1. Install the power window switch module. 2. Install the door trim panel after reconnecting the relevant connectors ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com