Hyundai Accent: Removal Of Parts

First find the cause of the problem and then determine whether removal or disassembly before starting the job.

Special Tools

Use special tools when they are required. ...

Disassembly

If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be disassembled in a way that will not affect their performance or external appearance. ...

See also:

Removal
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). 2. Remove the rear sea ...

Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform ...

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...