Hyundai Accent: Replacement| 1. |
Remove the rear wheel & tire.
|
| 2. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
|
| 3. |
Installation is the reverse of removal.
|
InspectionInstallation
•
Be sure to check the low pressure fuel hose
quick-connector (A) is completely connected to ...
Installation
1.
Install the BCM.
2.
Install the crash pad lower panel.
...
Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...