Hyundai Accent: Steering System

TPMS Receiver. Repair procedures

Replacement 1. Disconnect the battery negative cable from the battery. 2. Remove faulty part and fit bracket assembly to new part. ...

General Information

...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Installation
1. Installation is the reverse of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. ...

Inspection
Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floor board) and the clutch pedal clevis pin play (measu ...