Hyundai Accent Manuals

Hyundai Accent: Removal - Driver Airbag (DAB) Module and Clock Spring. Repair procedures - Airbag Module - Restraint (Advanced)Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Repair procedures / Removal

1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
Remove the driver airbag module mounting bolts (2EA).
4.
Remove the wiring fixing clip (C), and then release the connector locking pin to disconnect the driver airbag module connector (B).

The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
5.
Remove the steering wheel and steering wheel column shroud.
(Refer to the Steering System group - "Steering Column and Shaft")
6.
Disconnect the clock spring connector, then remove the clock spring.

Driver Airbag (DAB) Module and Clock Spring. Repair procedures
...

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one. ...

See also:

Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Vehicle data collection and event data recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road ...

SRSCM Connector terminal
Pin Function (Connector A) Pin Function (Connector B) 1 Ignition 1 Seat belt pretensioner [Drive ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com