Hyundai Accent Manuals

Hyundai Accent: Removal - Passenger Airbag (PAB) Module. Repair procedures - Airbag Module - Restraint (Advanced)Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / Airbag Module / Passenger Airbag (PAB) Module. Repair procedures / Removal

1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
3.
Disconnect the passenger airbag connector (A) and remove the PAB mounting bolt (B).
4.
Remove the crash pad.
(Refer to the Body group - "Crash pad")
Replace the crash pad which is damaged while PAB is deployed.
5.
Remove the mounting bolts from the crash pad. Then remove the passenger airbag.

The removed airbag module should be stored in a clean, dry place with the airbag cushion up.

Passenger Airbag (PAB) Module. Repair procedures
...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least three minutes befo ...

See also:

Circuit Diagram - ESC (4)
...

Rear Seat Belt. Repair procedures
Replacement Rear Seat Belt Replacement [Sedan] • When installing the belt, make s ...

Manifold Absolute Pressure Sensor (MAPS). Troubleshooting
Signal Waveform ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com