Be sure to install the harness wires not to be pinched or interfered
with other parts.
|
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Install the new seat back assembly.
(Refer to the Body group - "Seat")
|
4. |
Install the front seat assembly.
(Refer to the Body group - "Seat")
|
5. |
Recline and slide the front seat forward fully, make sure the
harness wires are not pinched of interfering with other parts.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the side airbag (SAB), confirm proper system
operation:
|
Manual climate control system
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air will be selected automatically. ...
California perchlorate notice
Perchlorate Material-special handling may apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Notice to California Vehicle Dismantlers: Perchlorate containing materials, such
as air bag infla ...
Troubleshooting
Troubleshooting
Starting System
Symptom
Suspect area
Remedy
Engine will not crank
Battery charge low
Charge or replace batt ...