Hyundai Accent: Removal
| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
| 3. |
Disconnect the curtain airbag harness connector.
|
| 4. |
After loosening the mounting bolts remove the curtain airbag.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
See also:
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower ar ...
Installation
If reinstalling used cover, the cover should be installed
with its clutch disc as a set.
1.
Re ...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct si ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com