1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the following parts.
(Refer to the Body group - "Interior trim")
|
4. |
Remove the upper anchor bolt.
|
5. |
Disconnect the seat belt pretensioner connector (A).
|
6. |
Loosen the seat belt pretensioner mounting bolts (B,C) and remove
the seat belt pretensioner.
|
Outside rearview mirror
Be sure to adjust mirror angles before driving.
Your vehicle is equipped with both lefthand and right-hand outside rearview mirrors.
The mirrors can be adjusted remotely with the remote switch. The ...
Description
Body control module (A) receives various input switch signals controlling
time and alarm functions for the door lock/unlock control, lamp control,
power window timer warning con ...
ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7В°
TPS
TPS 1 fault
ECM looks at TPS2
...