1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Install the seat belt pretensioner with mounting bolts (B, C).
|
4. |
Connect the seat belt pretensioner (BPT) connector (A).
|
5. |
Install the upper anchor bolts.
|
6. |
Install the following parts.
(Refer to the Body group - "Interior trim")
|
7. |
Insert the seat belt to the anchor pretensioner (A).
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Intake Air Temperature
Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold
Absolute Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction o ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
con ...
Removal
1.
Remove the mounting bolt and disconnect the horn connector, then
remove the horn (A).
...