1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the following parts. (Refer to the Body group-Interior
trim)
|
4. |
Disconnect the anchor pretensioner connector (A).
|
5. |
Loosen the anchor pretensioner mounting bolt (B) and remove the
anchor pretensioner.
|
Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Specification
Engine
T/M
Joint type
Max. permissible angle
Outer
Inner
Outer
Inner
Gasoline 1.6
...
Inspection
Multifunction Switch (Lighting)
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lighting switch of the multi-function switc ...