Hyundai Accent Manuals

Hyundai Accent: Installation - Anchor Pretensioner (APT). Repair procedures - Seat Belt Pretensioner - Restraint (Advanced)Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / Seat Belt Pretensioner / Anchor Pretensioner (APT). Repair procedures / Installation

1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at least three minutes.
3.
Install the anchor pretensioner with mounting bolt.
Tightening torque :
39.2 ~ 53.9 N.m(4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
4.
Connect the anchor pretensioner connector.
5.
Install the following parts.
(Refer to the Body group - "Interior trim")
A.
Center pillar trim
B.
Door scuff trim
6.
Insert the seat belt to the anchor pretensioner (A).

Make sure the lock pin is connected in properly.
7.
Reconnect the battery negative cable.
8.
After installing the anchor pretensioner, confirm proper system operation:
A.
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
Removal
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the seat belt after pushing ...

Brake System
...

See also:

Schematic Diagrams
Schematic Diagram Connector pin number Pin No. Discription Remark 1 - 2 - ...

Child-protector rear door lock
The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in th ...

Specifications
Specifications Items Specifications Rated voltage DC 12V Operating temperature range  -30°C ~ +80°C (-22 ~ +17 ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com