Hyundai Accent: Inspection
| 1. |
Inspect the check valve in the vacuum hose.
|
| 2. |
Check the boot for damage.
|
Removal
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical group - "Battery")
...
Installation
1.
Installation is the reverse of removal.
A.
...
See also:
Installation
1.
Installation is the reverse of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct si ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com