Hyundai Accent: Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
Removal
1.
Turn ignition switch OFF.
2.
Disconnect the brake fluid level switch connector (A) from the
reservoir.
3.
...
Brake Line. Components and Components Location
Components
...
See also:
Sub Frame. Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Driver Power Window Switch (1)
...
Rear Disc Brake. Components and Components Location
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com