Hyundai Accent Manuals

Hyundai Accent: Removal - Brake Line. Repair procedures - Brake System - Brake SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Brake System / Brake System / Brake Line. Repair procedures / Removal

1.
Disconnect the brake fluid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservoir with a syringe.
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
3.
Remove the wheel & tire.
4.
Loosening the tube flare nut (B).
Tightening torque:
12.7 ~ 16.7 N.m (1.3 ~ 1.7 kgf.m, 9.4 ~ 12.3 lb-ft)
[Front]

[Rear]
5.
Disconnect the brake tube by remove the brake hose clip (A).
6.
Disconnect the brake hose from the brake caliper by loosening the bolt (A).
Tightening torque:
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
[Front disc brake]

[Rear Disc brake]

Brake Line. Repair procedures
...

Inspection
1. Check the brake tubes for cracks, crimps and corrosion. 2. Check the brake hoses for cracks, damage and fluid leakage. 3 ...

See also:

Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative impact on the air conditioning system. Therefore, if abnormal operation i ...

Removal
Door Mirror Turn Signal Lamp 1. Remove the mirror (A) from the mirror holder. Be careful not to damage to the clip. 2. Remove ...

Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com