1. |
Disconnect the stop lamp switch connector (A).
|
2. |
Adjust the brake pedal height (A) as illustration below.
|
3. |
Adjust the stop lamp switch clearance (B) and brake pedal free
play.
|
4. |
Connect the stop lamp switch connector.
|
1. |
Disconnect the stop lamp switch connector (A).
|
2. |
Pull the locking plate (A) as indicated by the arrow.
|
3. |
Turn stop lamp switch 45° counterclockwise and remove it.
|
4. |
Fix the brake pedal arm and insert fully the stop lamp switch
as hiding contact part.
|
5. |
After inserting, turn the stop switch (A) 45° clockwise, and then
assemble locking plate (B) by pushing.
|
6. |
Confirm the gap between stop lamp switch and bracket.
|
7. |
Connect the stop lamp switch connector.
|
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram
...
Active ECO operation
Active ECO helps improve fuel efficiency by controlling the engine and transaxle.
But fuel-efficiency can be changed by the driver's driving habits and road conditions.
When the Active ECO ...
Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacing the ...