Hyundai Accent Manuals

Hyundai Accent: Removal - Rear Disc Brake. Repair procedures - Brake System - Brake SystemHyundai Accent: Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the parking brake cable (A), after removing the clip (B).

Parking brake lever in the car must be in fully loosened position.
3.
Remove the hose eyebolt (B).

Tightening torque:
Brake hose to caliper:
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

4.
Loosen the caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Caliper assembly to carrier:
49.0 ~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)

5.
Remove the rear brake disc by loosening the screws (A).


Rear Disc Brake. Repair procedures
...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...

See also:

Removal
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. ...

Fuel Tank Pressure Sensor (FTPS). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

CVVT Oil Control Valve (OCV). Specifications
Specification Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com