Hyundai Accent Manuals

Hyundai Accent: Replacement - Rear Disc Brake. Repair procedures - Brake System - Brake SystemHyundai Accent: Replacement

Hyundai Accent RB (2010-2018) Service Manual / Brake System / Brake System / Rear Disc Brake. Repair procedures / Replacement

Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper body (A).
Tightening torque:
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~23.1 lb-ft)

•
Where necessary prevent the guide rods from rotating with an appropriate wrench.
•
Be careful not to damage the dust covers.
2.
Replace pad retainers (A) and brake pads (B) in the caliper carrier (C).

•
Clean the pad retainer surface at the caliper bracket.
•
Inspect the piston boots for damage and replace if necessary.
•
Check the smooth action of the guide rods, and their dust covers for damage.

Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Inspection
Rear Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

See also:

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “click” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is ...

Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Connect the trip switch connector. ...

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp fo ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com