1. |
Installation is the reverse of removal.
|
2. |
Use a SST (09580-0U000) when installing the brake caliper assembly.
|
3. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
Reassembly
1.
After spreading grease on the rack bar gear part (A), install
rack bar (B) in the direction of the arrow.
...
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Rear Bumper. Components and Components
Location
Components
[Sedan]
1. Rear bumper cover
2. Rear bumper side bracket [RH]
3. Rear bumper side bracket [LH]
[5 Door]
1. ...