Rear Disc Brake Type |
1. |
Install the parking brake cable.
|
2. |
Install the parking brake cable (A), and then install the clip
(B).
|
3. |
Install the rear tire and wheel.
|
4. |
Install the parking brake lever assembly.
|
5. |
Apply a coating of the specified grease to each sliding parts
(A) of the ratchet plate or the ratchet pawl.
|
6. |
Install the parking brake cable adjuster, then adjust the parking
brake lever stroke by turning adjusting nut (A).
|
7. |
Release the parking brake lever fully, and check that parking
brakes do not drag when the rear wheels are turned. Readjust if necessary.
|
8. |
Make sure that the parking brakes are fully applied when the parking
brake lever is pulled up fully.
|
9. |
Reconnect the connector (A) of parking brake switch.
|
10. |
Install the floor console rear mounting bracket.
|
11. |
Install the floor console. (Refer to Body group - "Floor console")
|
Rear Drum Brake Type |
1. |
Install the parking brake cable.
|
2. |
Install the parking brake cable (A), and then install the clip
(B).
|
3. |
Remove the brake shoe. (Refer to the rear drum brake)
|
4. |
Install the rear tire and wheel.
|
5. |
Install the parking brake lever assembly.
|
6. |
Apply a coating of the specified grease to each sliding parts
(A) of the ratchet plate or the ratchet pawl.
|
7. |
Install the parking brake cable adjuster, then adjust the parking
brake lever stroke by turning adjusting nut (A).
|
8. |
Release the parking brake lever fully, and check that parking
brakes do not drag when the rear wheels are turned. Readjust if necessary.
|
9. |
Make sure that the parking brakes are fully applied when the parking
brake lever is pulled up fully.
|
10. |
Reconnect the connector (A) of parking brake switch.
|
11. |
Install the floor console rear mounting bracket.
|
12. |
Install the floor console. (Refer to Body group - "Floor console")
|
Tail lamp warning chime
If you turn the ignition switch to the OFF position with the tail lamps ON and
the driver's door in an open position, the warning chime will sound.
To stop the chime, perform one of the followi ...
Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar contains
the vehicle identification number (VIN). ...
Cylinder Block. Components and
Components Location
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
...