Hyundai Accent: Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation in
extremely humid weather. The difference between the temperature of the outside air
and that of the windshield could cause the outer surface of the windshield to fog
up, causing loss of visibility. In this case, set the mode selection knob or button
to the position and fan speed control
knob or button to the lower speed.
- For maximum defrosting, set the temperature control to the extreme right/hot
position and the fan speed control to the highest speed.
- If warm air to the floor is desired while defrosting or defogging, set the
mode to the floor-defrost position.
- Before driving, clear all snow and ice from the windshield, rear window,
outside rear view mirrors, and all side windows.
- Clear all snow and ice from the hood and air inlet in the cowl grill to
improve heater and defroster efficiency and to reduce the probability of fogging
up the inside of the windshield.
The heating and cooling system can be controlled manually by pushing buttons
other than the AUTO button. In this case, the system works sequentially according
to the order of buttons selected.
Wh ...
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air will be selected automatically. ...
See also:
Map lamp
Push the lens (1) to turn the map lamp on or off. This light produces a spot
beam for convenient use as a map lamp at night or as a personal lamp for the driver
and the front passenger.
DOOR ...
Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic
force generated by the engine oil supplied to the advance or retard chamber
in accordance with the CVVT oil control valve con ...
Circuit Diagram (2)
...