1. |
Turn ignition switch OFF.
|
2. |
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
|
3. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
4. |
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
|
5. |
Loosen the HECU bracket nuts (A), then remove HECU and bracket.
|
6. |
Remove the 3 bolts, and then remove the bracket from HECU.
|
Interior F ( 5Door )
Seatbelt height adjust upper mounting hole (Ø15)
Seatbelt height adjust lower mounting hole (Ø15)
...
Tire chains
Tire chains, if necessary, should be installed on the front wheels.
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do ...
Clutch Master Cylinder. Components and Components
Location
Components
1. Reverse hose
2. Master cylinder
3. Clutch switch
4. Ignition lock switch
5. Pedal pad
...