Removal
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the front seat (LH) assembly.
(Refer to the Body group - "Seat")
|
3. |
Disconnect the yaw rate & lateral G sensor connector (A).
|
4. |
Remove the mounting nuts (B).
|
5. |
Installation is the reverse of removal.
|
Replacement
Glass Replacement
•
Put on glove to protect your hands.
1.
...
Components and Components Location
Components Location
1. Sub frame
2. Drive shaft
3. Lower arm
4. Strut assembly
5. Steering gearbox
6. Stabilizer bar
...
Removal
1.
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
2.
Remove the roof trim.
(Refer to ...