Hyundai Accent: Fender. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Exterior / Fender. Repair procedures
Replacement
|
| 1. |
Remove the front bumper cover.
(Refer to the BD group – “Front bumper”)
|
| 2. |
Loosen the mud guard mounting screws.
|
| 3. |
After loosening the mounting screws, then remove the front bumper
side mounting bracket (A).
|
| 4. |
Using a screwdriver or remover, remove the fender side cover (B).
|
| 5. |
After loosening the mounting bolts and nut, then remove the fender
(A).
|
| 6. |
Installation is the reverse of removal.
|
Exterior
...
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds.
(Refer to the ST group - & ...
EBD(Electronic Brake-force
Distribution). Description and Operation
Operation
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the maximum braking effectiveness by the rear wheels.
It further utilizes ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com