Hyundai Accent: Replacement
Trunk Lid Assembly Replacement
•
|
When removing and installing the trunk lid, an assistant
is necessary.
|
•
|
Put on gloves to protect your hands.
|
|
1. |
Detach the clips, then remove the trunk lid trim (A).
|
2. |
Disconnect wiring (B) and connectors.
|
3. |
After loosening the mounting bolts, then remove the trunk lid
(A).
Tightening torque :
6.9 ~ 8.8 N.m (0.7 ~ 0.9 kgf.m, 5.1 ~ 6.5 lb-ft)
|
|
4. |
Installation is the reverse of removal.
• |
Replace any damaged clips.
|
|
|
Trunk Lid Latch Replacement
1. |
Remove the trunk lid trim.
|
2. |
Disconnect the trunk lid latch connector (A).
|
3. |
Disconnect the cable (B), then loosen the latch assembly (C) mounting
bolts and remove.
Tightening torque :
6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)
|
|
4. |
Installation is the reverse of removal.
• |
Make sure the trunk lid locks/unlocks and opens/closes
properly.
|
|
|
Trunk Lid Weatherstrip Replacement
1. |
Remove the trunk lid weatherstrip (A).
• |
Do not apply sealant to the body.
|
|
|
2. |
Installation is the reverse of removal.
• |
Install the weatherstrip aligned with canter line
(B).
|
|
|
1.
After loosening the trunk lid hinge (A) mounting bolts, adjust
the trunk lid by moving it up or down, or right or left.
2.
Adjust the tr ...
See also:
EBD(Electronic Brake-force
Distribution). Description and Operation
Operation
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the maximum braking effectiveness by the rear wheels.
It further utilizes ...
Defroster
CAUTION
To prevent damage to the conductors bonded to the inside surface of the
rear window, never use sharp instruments or window cleaners containing abrasives
to clean the window.
NOTICE
If ...
Line Pressure Control Solenoid Valve. Specifications
Specifications
Direct control VFS[LINE Pressure]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
500.14 ~ 9.81
(5.4 ~ 0.1, 7.6 ...