1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Electrical System
1.
Be sure to disconnect the battery cable from the
negative (-) terminal of the battery.
2.
Never pull on the wires when disconnecting con ...
Output Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3)
0.033 ...
Positive Crankcase
Ventilation (PCV) Valve. Description and Operation
Operation Principle
...