Hyundai Accent: Body Side Moldings. Repair procedures
Replacement
Trunk Lid Garnish Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Remove the trunk lid trim.
(Refer to the BD group - "Trunk Lid")
|
|
2. |
After loosening the mounting nuts, then remove the trunk lid garnish
(A).
|
|
3. |
Installation is the reverse of removal.
|
Rear Spoiler Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Disconnect the rear spoiler connector (A) and washer nozzle (B).
|
|
2. |
After loosening the mounting nuts, then remove the rear spoiler
(A).
|
|
3. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Roof Molding Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Using a screwdriver or remover, remove the roof molding (A).
|
|
2. |
Installation is the reverse of removal.
|
• |
Put on gloves to protect your hands.
|
|
• |
Replace any damage clips.
|
|
|
Delta Garnish Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Using a screwdriver or remover, remove the delta garnish (A).
|
|
2. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Quarter Garnish Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Using a screwdriver or remover, remove the quarter garnish (A).
|
|
2. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Front Wheel Guard Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
2. |
After loosening the mounting screws and nuts, then remove the
front wheel guard (A).
[LH]
[RH]
|
|
3. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Rear Wheel Guard and Mud Guard Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
2. |
After loosening the mounting screws and nuts, then remove the
rear wheel guard (A) and mud guard (B).
|
|
3. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Deflector Guard Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damaged.
|
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to scratch the body surface.
|
|
|
2. |
After loosening the mounting screws, then remove the deflecotor
guard (A).
|
|
3. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
|
Glass Adjustment
•
Check the glass run channel for damage or deterioration,
and replace ...
Components
1. Sunroof frame assembly
2. Motor assembly
3. Glass assembly
4. Guide assembly
5. Drip rail assembly
6. Drip link
7. Sunshade assembly
8. Defle ...
See also:
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...
Tilting the sunroof
To open the sunroof
Push the sunroof control lever upward until the sunroof moves to the desired
position.
To close the sunroof
Pull the sunroof lever downward until the sunroof moves to the de ...
Rear window defroster
The defroster heats the window to remove frost, fog and thin ice from the rear
window, while the engine is running.
To activate the rear window defroster, press the rear window defroster button
...
Adjustment
Sunroof. Components and Components
Location