Replacement
|
1. |
Using a screwdriver or remover, remove the front door quadrant
inner cover (A).
|
2. |
Disconnect the tweeter speaker connector (A).
|
3. |
Disconnect the connector (A).
|
4. |
After loosening the mounting bolts, then remove the outside rear
view mirror (B).
|
5. |
Installation is the reverse of removal.
|
Mirror Replacement |
1. |
Push the inside rear view mirror base (A) up to remove the inside
rear view mirror assembly (B).
|
2. |
Installation is the reverse of removal.
|
1. |
Remove the ECM mirror cover (A).
|
2. |
Disconnect the ECM mirror connector (B).
|
3. |
Loosen the ECM mirror mounting screw (A).
|
4. |
Push the ECM mirror base up to remove the ECM mirror assembly
(A).
|
5. |
Installation is the reverse of removal.
|
Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant
Coding” procedure.
1.
On ...
Sunshade
The sunshade will be opened with the glass panel automatically when the glass
panel is opened. You will have to close it manually if you want it closed.
CAUTION
The sunroof is made to slide tog ...
Key operations
Used to start the engine, lock and unlock the doors.
WARNING - Ignition key
Leaving children unattended in a vehicle with the ignition key is dangerous
even if the key is not in the ignition swit ...