Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Remove 2 screws on the steering wheel.
|
| 5. |
Remove the steering wheel cover (A) after loosening 4 screws.
|
| 6. |
Remove the remote control switch after loosening 1 screw and disconnecting
the connector.
[RH]
[LH]
|
Inspection
1.
Check the audio remote control switch (A) for resistance between
terminals in each switch position.
Switch
C ...
Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the steering wheel.
...
See also:
Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start
the engine). Any light that does not illuminate should be checked by an authorized
HYUNDAI dealer.
After starting th ...
Installation
1.
Combustion seal
2.
Rubber washer
3.
Support disc
4.
O-ring
...
Radiator. Components and Components
Location
Components
1. Cooling fan & reservoir tank assembly
2. Radiator lower hose
3. Air guard
4. Upper cover
5. Radiator upper hose
6. Radiator mounting brack ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com