Hyundai Accent: Removal

Inspection

Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+) ...

Installation

1. Connect the horn connector, then reassemble the horn. ...

See also:

Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling the fuel filler lid opener switch. NOTICE If the fuel filler lid will not open because ice has formed around it, tap ligh ...

Removal
1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to ...