Hyundai Accent: Adjustment
Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Horn / Repair procedures / Adjustment
Operate the horn, and adjust the tone to a suitable level by turning the
adjusting screw.
After adjustment, apply a small amount of paint around the screw
head to keep it from loosening.
|
Installation
1.
Connect the horn connector, then reassemble the horn.
...
Keyless Entry
...
See also:
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com