1. |
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
|
2. |
Select the vehicle model and then do "CODE SAVING"
|
3. |
After selecting "CODE SAVING" menu, button "ENTER" key, then the
screen will be shown as below.
|
4. |
After removing the ignition key from key cylinder, push "ENTER"
key to proceed to the next mode for code saving. Follow steps 1 to 4
and then code saving is completed.
|
Cowl Top Cover. Repair procedures
Replacement
1.
Remove the wiper arm cap (B) and remove the nuts, then remove
wiper arm (A).
Tighening torque :
22.6 ~ 26.5 Nm (2.3 ~ ...
Glove box
To open the glove box, push the button and the glove box will automatically open.
Close the glove box after use.
WARNING
To reduce the risk of injury in an accident or sudden stop, always keep ...