Hyundai Accent: BCM (Body Control Module)

Transmitter Code Registration (Using GDS)

1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...

Body Control Module (BCM). Specifications

Specifications Item Requirement Remark Rated voltage DC 12V Shall activate normally in these range. Operat ...

See also:

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...

Reporting safety defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in ...

Specification
Engine T/M Joint type Max. permissible angle Outer Inner Outer Inner Gasoline 1.6 ...