Specifications
Item |
Requirement |
Remark |
Rated voltage |
DC 12V |
Shall activate normally in these range. |
Operating voltage range |
DC 9 ~ 16V |
|
Operating temperature range |
-30°C ~ +75°C (-22°F ~ +167°F) |
|
Storage temperature range |
-40°C ~ +85°C (-40°F ~ +185°F) |
|
Max humidity in use |
95% |
|
High voltage resistance |
24V |
|
Insulation resistance |
100MΩ or more (measured with 500V MEGGER) |
Specify as well as parts that insulation like PCB, moisture-proof
COATING is required |
Dark Current |
Max 4mA |
Measure when the state, all output loads are OFF and there are no
Input SW(including TX operation) changes, continues 2sec. |
Voltage drop |
1.2V or less |
Output terminals for POWER WINDOW RELAY shall be 2.0V or less |
NO |
System name |
Capacity |
1 |
Room lamp |
DC 12V 20W(Lamp load) |
2 |
Power door relay |
DC 12V 200mA(Inductive load) |
3 |
Hazard relay |
DC 12V 200mA(Inductive load) |
4 |
Door lock relay |
DC 12V 200mA(Inductive load) |
5 |
Door unlock relay |
DC 12V 200mA(Inductive load) |
6 |
Driver door unlock relay |
DC 12V 200mA(Inductive load) |
7 |
Tail lamp relay |
DC 12V 200mA(Inductive load) |
8 |
Horn relay |
DC 12V 200mA(Inductive load) |
9 |
Interior autocut |
DC 12V 200mA(Inductive load) |
Components and Components Location
Component Location
1. Trunk lid actuator & switch
2. Rear door switch
3. Body control module
4. Key warning switch
5. Front door switch
6. Front door loc ...
Front Body E ( 5Door )
Hood hinge mounting hole (Ø10)
Fender apron upper member tooling
hole (Ø6.6)
Cowl under ...
Parking brake
Checking the parking brake
Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone ...