Hyundai Accent Manuals

Hyundai Accent: Seat Heater. Repair procedures - Seat Electrical - Body Electrical SystemHyundai Accent: Seat Heater. Repair procedures

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Seat Electrical / Seat Heater. Repair procedures

Inspection

Driver seat and Passenger seat
1.
Check for continuity and measure the resistance between terminals.
[Cushion]

PIN
No.
 Description
 PIN
No.
 Description
3
 Heater (+)
 5
 NTC -
4
 NTC +
 6
 GND

Average Max. temperature
- Cushion : HIGH : 42 ± 2°C / LOW : 39 ± 2°C
- Back : HIGH : 52 ± 2°C / LOW : 46 ± 2°C
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Fabric / Leather)
- Cushion : 1.54Ω ± 10%
- Back : 1.23Ω ± 10%
- Set : 2.77Ω ± 10%

Seat Heater. Components and Components Location
Components ...

Seat Heater Switch. Schematic Diagrams
Schematic Diagram ...

See also:

Adjustment
Parking Brake Lever Stroke Adjustment 1. Remove the floor console. (Refer to Body group - "Floor console".) 2. R ...

Blade inspection
NOTICE Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with foreign ma ...

Installation
• Install the component with the specified torques. • ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com