1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors from the fuse side of the interior junction
box.
|
4. |
Remove the interior junction box(A) after loosening the mounting
nuts (2EA).
|
5. |
Disconnect the connectors from the back side of the smart junction
box.
|
Removal
Disassembly of the thermostat would have an adverse
effect, causing a lowering of cooling efficiency.
1.
...
Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures
reco ...
Rear Bumper. Repair procedures
Replacement
[Sedan]
•
Put on gloves to protect your hands.
•
...