Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the cluster fascia panel (A) after disconnecting the trip
switch connector(B).
|
| 3. |
Remove the cluster fascia (A) from the crash pad after removing
4 screws.
|
| 4. |
Disconnect the cluster fascia connecters(A) and then remove the
cluster.
|
Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use wheel chocks
...
Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Connect the trip switch connector.
...
See also:
Tilt steering
Tilt steering allows you to adjust the steering wheel before you drive. You can
also raise it to give your legs more room when you exit and enter the vehicle.
The steering wheel should be positione ...
Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother
high speed ride. The radial- ply tires used on this vehicle are of belted construction,
and are selected to comple ...
Low tire pressure telltale
When the tire pressure monitoring system warning indicator is illuminated, one
or more of your tires is significantly under-inflated.
If the telltale illuminates, immediately reduce your speed, a ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com