Hyundai Accent: Installation
| 1. |
Connect the cluster connector.
|
| 2. |
Install the cluster assembly.
|
| 3. |
Connect the trip switch connector.
|
| 4. |
Install the center fascia panel.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A) after disconnecting the trip
switch connector(B).
...
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Speedometer does not operate
Cluster fuse (10A) is blown
Check for short and ...
See also:
Removal
1.
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
2.
Remove the rear sea ...
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Fender. Repair procedures
Replacement
•
When removing and installing the fender, an assistant
is necessary.
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com