Inspection
1. |
Remove the front door trim.
(Refer to the BD group - "Front door")
|
2. |
Remove the front door latch.
|
3. |
Disconnect the 5P connector from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
1. |
Remove the rear door trim.
(Refer to the BD group - "Rear door")
|
2. |
Remove the rear door latch.
|
3. |
Disconnect the 5P connector from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
1. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
2. |
Remove the front door latch.
|
3. |
Disconnect the 5P connector from the actuator.
|
4. |
Check for continuity between the terminals in each switch position
when inserting the key into the door according to the table.
|
1. |
Remove the rear door trim panel.
(Refer to the BD group - "Rear door")
|
2. |
Remove the rear door latch.
|
3. |
Disconnect the 5P connector from the actuator.
|
4. |
Check for continuity between the terminals in each switch position
according to the table.
|
Audio Unit. Components and Components Location
Components(PA710S)
Connector A
No
Terminal Description
Condition
Specified Condition
A1
Loudspeaker Rear Left+
...
Passenger Airbag (PAB) Module. Description
and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB. ...
Front Body A ( 4Door )
Hood hinge mounting hole (Ø10)
Fender apron upper member tooling
hole (Ø6.6)
Front shock ...