Hyundai Accent Manuals

Hyundai Accent: Removal - Power Door Lock Switch. Repair procedures - Power Door Locks - Body Electrical SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch. Repair procedures / Removal

1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Disconnect the power window switch module connector (A) from the wiring harness.
4.
Remove the power window switch module (A) from the door trim after loosening the mounting screws (5EA).

-
Be careful not to damage door trim panel and door module mounting hooks.

Inspection
Driver Door Lock Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to ...

Installation
1. Install the power window switch module. 2. Install the door trim panel after reconnecting the relevant connectors ...

See also:

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp fo ...

Adjustment
Adjusting the control cable 1. Set room side AT lever(shift lever) and automatic transaxle side manual control lever to "N" position. 2. ...

Checking the coolant level
WARNING Removing radiator cap Never attempt to remove the radiator cap while the engine is operating or hot. Doing so might lead to cooling system and engine damage and could result in s ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com