Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch. Repair procedures / Installation

1.	Install the power window switch module.

2.

Install the door trim panel after reconnecting the relevant connectors

-	Make sure that the power window switch module connectors are plugged properly.

-	Check that the power window switch and door lock switch operate normally.

Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Power Door Mirrors

...

See also:

Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor connector 2. Rear wheel speed sensor ...

California perchlorate notice
Perchlorate Material-special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate. Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag infla ...

Checking the coolant level
WARNING Removing radiator cap Never attempt to remove the radiator cap while the engine is operating or hot. Doing so might lead to cooling system and engine damage and could result in s ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com