Inspection
1. |
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
|
2. |
Disconnect the power door mirror connector from the harness.
|
3. |
Apply battery voltage to each terminal as shown in the table and
verify that the mirror operates properly.
Side Repeater Lamp
Mirror Heater
|
Removal
1.
Remove the under covers (A).
Tightening torque:
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 7.9lb-ft)
...
Components
[RH]
1. BJ assembly
2. Circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. T ...
Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC appl ...