1. |
Loosen the windshield wiper arm nut (A) after removing a wiper
cap (B).
|
2. |
Remove the windshield wiper arm and blade.
|
3. |
If necessary, release the wiper blade fixing clip by pulling up
and remove the wiper blade from the inside radius of wiper arm.
|
4. |
Disconnect the washer hose (A) connected to cowl top cover.
|
5. |
Remove the weather strip and the cowl top cover (A) after removing
rivets.
|
6. |
Disconnect the wiper motor connector (A) from the wiper motor
& linkage assembly.
|
7. |
Remove the windshield wiper motor and linkage assembly (A) after
removing 2 bolts.
|
8. |
Hold the wiper motor crank arm and remove the upper linkage (A)
from the wiper motor crank arm.
|
9. |
Loosen 3 bolts and remove the wiper motor(A) from the wiper motor
crank arm.
|
Installation
1.
Installation is the reverse of removal.
•
...
Luggage room lamp
The luggage room lamp comes on when the trunk lid/tailgate is opened.
CAUTION
The luggage room lamp comes on as long as the trunk lid/tailgate opens.
To prevent unnecessary charging system drai ...
Component location
1. Driveshaft (LH)
2. Circlip
3. Circlip
4. Driveshaft (RH)
...