1. |
Install the wiper motor.
|
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
4. |
Install the wiper motor and linkage assembly and then connect
the wiper motor connector.
|
5. |
Install the cowl top cover.
|
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the auto stop position.
A : Glass marking point
|
8. |
Set the cowl top cover on the specified spray position.
|
Curtain Airbag (CAB) Module. Description
and Operation
Description
Curtain airbags are installed inside the headliner (LH and RH) and protect
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of curtain ...
Rear Torsion Beam Axle. Components
and Components Location
Components
1. Rear torsion beam axle
...
Room Lamp. Repair procedures
Inspection
Room Lamp
1.
Check that the switch operates properly after disconnecting the
room lamp connector (A).
...